Skip to content

Description

Immiseal is used as an adjunct to dural repair, after suturing or after onlay placement of autologous dura or a dural substitute. Over the closure line it forms a barrier that prevents cerebrospinal fluid leakage and limits dural adhesions.

The sealant is made of synthetic materials (PEG-SG and PEI). When they are mixed with water, electrophilic and nucleophilic reactions form a hydrogel within seconds. The raw material has a low molecular weight and the gel swells little, so it does not compress brain tissue: in the manufacturer’s tests, mass swelling was below 40% (by weight of absorbed water) and swelling in a single dimension was 10.7%.

The system comes ready to assemble. The two vials are connected to the syringes and shaken a few times to mix; then the vials are removed, the applicator is fitted and the sealant is ready to apply. It is stored below 30 °C and needs no thawing, so it is also available in emergencies.

Immiseal dual syringe

Indications

  • Adjunct to duraplasty: suturing or onlay of autologous dura or a dural substitute
  • Prevention of cerebrospinal fluid leakage after dural closure, in cranial and spinal surgery
  • Also used in tumour resection procedures

Features

  • Absorbable synthetic hydrogel
  • Gels within seconds
  • Degrades in about 21 days (preclinical study)
  • Mass swelling below 40%; 10.7% in a single dimension
  • Watertight barrier over the dural suture line
  • Dual syringe with applicator, assembled in two steps
  • Stored below 30 °C, no thawing needed
  • 5, 6, 8 and 10 ml volumes; 5, 10 and 15 cm applicator tips

Technical specifications

Technical specifications: Immiseal
CompositionPEG-SG + PEI (synthetic hydrogel)
Volumes5 ml, 6 ml, 8 ml, 10 ml
Applicator tip length5 cm (A), 10 cm (C), 15 cm (E)
ConfigurationsDS4, DS2 and DS series, each in all volumes and tip lengths; the DS-050 … DS-100 series by volume only
Example codesDS4A-050 = 5 ml, 5 cm tip; DS2E-100 = 10 ml, 15 cm tip; DS-080 = 8 ml
DegradationAbout 21 days (preclinical study)
Preclinical pressure testWatertight closure at 500 mmH₂O, 10 days after surgery (canine cranial surgery model)
Clinical trialNo CSF leakage at 7 ± 3 days after surgery in 65 of 65 cases (per-protocol set)
StorageBelow 30 °C
Packaging1 unit per box
Country of manufactureChina
ManufacturerMedprin (Medprin Regenerative Medical Technologies, Guangzhou); in Europe, Medprin Biotech GmbH, Frankfurt am Main

Gallery

Immiseal syringe and the two vials, before assembly

Documents

Frequently asked questions

When is Immiseal used?

As an adjunct to dural repair, after suturing or onlay application of autologous dura or a dural substitute, to prevent cerebrospinal fluid leakage. It is also used in tumour resection procedures.

How quickly does the gel form and how long does it stay?

The hydrogel forms within seconds, through electrophile-nucleophile reactions on mixing with water, and degrades in about 21 days, according to the preclinical study.

Does it compress brain tissue by swelling?

The manufacturer aimed for low swelling: in its tests, mass swelling was below 40%, by weight of absorbed water, and 10.7% in a single dimension.

How is it prepared and stored?

The vials are connected to the syringes and shaken a few times, then the applicator is fitted. It is stored below 30 °C and needs no thawing. Volumes are 5, 6, 8 and 10 ml, with 5, 10 and 15 cm tips.

Quote request

Product

Immiseal

Medprin

Fill in the form and we will get back to you shortly, usually within the same working day.

For example: quantity, sizes or the date of the procedure.

Privacy policy

Related products

Nexon Medical

EnSight Biportal

A complete solution for unilateral biportal endoscopic spine surgery (UBE): 4K endoscopic tower, Plasma and RF electrodes, dedicated instruments and an endoscopic drill.

Product page
Nexon Medical

EnSight Drape Pack

A complete sterile set for biportal and monoportal spinal endoscopy: drapes, camera cover, fluid collection and the small instruments needed, in a single pack.

Product page
Medacta

Mecta-C Stand Alone

A modular anterior cervical fusion (ACDF) system that combines a TiPEEK interbody cage with an anterior plate: 4 plate types, rigid or variable fixation, 8 configurations.

Product page