Skip to content
MediThinQ

3D MetaSCOPE

Head-worn 3D digital loupes: a stereoscopic camera with autofocus and 2-5× (3DMS-1) or 4-9× (3DMS-2) zoom shows the magnified image on a binocular Full HD display with a 40° field of view.

Description

3D MetaSCOPE replaces conventional optical loupes with a digital system. The 3D camera, mounted on the headband above the display, films the working field, and the magnified stereoscopic image appears on the binocular display worn by the clinician. The camera tilts from 0° upwards to 90° downwards, so the viewing angle no longer depends on head position.

There are two models: 3DMS-1, with a 64 MP sensor and 2-5× zoom, and 3DMS-2, with a 108 MP sensor and 4-9× zoom. The focus distance is set in 50 steps before the procedure, from the built-in controller or the remote; during work, autofocus keeps the image sharp. The flip function mirrors or inverts the image.

The 3D image is streamed live over Wi-Fi to SCOPEYE displays, tablets or Windows computers and can be recorded in 3D, for training, remote consultation and case review. The manufacturer presents the system mainly in dentistry and highlights posture: the clinician works with the head upright, not tilted at 45° as with conventional loupes.

Clinician wearing 3D MetaSCOPE in the operating room

Indications

  • Surgical and diagnostic procedures performed with magnifying loupes
  • Dentistry and oral surgery, the application presented by the manufacturer
  • Education and training: live 3D streaming to SCOPEYE, 3D recording
  • Remote consultation and research

Features

  • Stereoscopic 3D camera, 1920 × 1080 at 60 fps
  • 2-5× (3DMS-1) or 4-9× (3DMS-2) zoom, with autofocus
  • 50 focus steps, from the controller or the remote
  • Camera tilts from 0° upwards to 90° downwards
  • Binocular Full HD display, 40° field of view
  • Flip function: image mirroring and inversion
  • Live Wi-Fi streaming and 3D recording
  • Compatible with SCOPEYE; SCOPEYE 3D player software included
  • 6,700 mAh battery, up to 2 hours of continuous use
  • Optional wireless or wired headlight

Technical specifications

Technical specifications: 3D MetaSCOPE
Models3DMS-1; 3DMS-2
DisplayBinocular, light guide, top-down display; 1920 × 1080 micro-display; 40° field of view
Weight420 g
Camera sensor3DMS-1: 64 MP; 3DMS-2: 108 MP
Zoom3DMS-1: 2-5×; 3DMS-2: 4-9×
Camera output1920 × 1080, 60 fps
Camera tilt0° upwards to 90° downwards
Power6,700 mAh rechargeable battery; up to 2 hours of continuous use; full charge in 3 hours
ConnectivityWi-Fi, 3D streaming and 3D video recording; SCOPEYE 3D player software
CleaningCompatible with alcohol-based disinfectants
Package3D MetaSCOPE with controller; detachable shade (transparent, 5%, 15%, 35%); remote controller; controller charging station and power adapter; carrying case and pin
OptionalWireless or wired headlight

Gallery

3D MetaSCOPE components: headlight, autofocus, 0-90° angle and zoom steps
The 3D image in the binocular display, with 40° field of view and flip function
Streaming from 3D MetaSCOPE to SCOPEYE displays and computers
Training session with live 3D streaming to trainees wearing SCOPEYE

Documents

Frequently asked questions

How does 3D MetaSCOPE differ from optical loupes?

The image does not pass through lenses; it is filmed by a 3D camera and shown on the binocular display. The camera tilts from 0° upwards to 90° downwards, so the clinician can work with the head upright, and the image can be streamed and recorded.

What is the difference between 3DMS-1 and 3DMS-2?

3DMS-1 has a 64 MP sensor and 2-5× zoom, while 3DMS-2 has a 108 MP sensor and 4-9× zoom. Both have autofocus, 1920 × 1080 output at 60 fps and a 40° field of view.

How long does the battery last?

The 6,700 mAh battery provides up to 2 hours of continuous use and fully charges in 3 hours.

How is the image shared with others?

Over Wi-Fi, live, to SCOPEYE displays, tablets or Windows computers, with the SCOPEYE 3D player software. The image can also be recorded in 3D.

Quote request

Product

3D MetaSCOPE

MediThinQ

Fill in the form and we will get back to you shortly, usually within the same working day.

For example: quantity, sizes or the date of the procedure.

Privacy policy

Related products

MediThinQ

SCOPEYE

A head-mounted medical display that brings the 2D or 3D image from the equipment in the room in front of the surgeon’s eyes. Two models: SCOPEYE EUD (410 g) and SCOPEYE Feather (295 g).

Product page
MediThinQ

3D Microvision

A 3D exoscope on a mobile stand, with up to 20× zoom, autofocus and LED illumination. The surgeon sees the stereoscopic Full HD image on the SCOPEYE Feather display instead of through an eyepiece.

Product page
Kontour Medical

CranioPEEK3D for aesthetic surgery

Patient-specific facial PEEK implants, 3D-printed from the patient’s imaging, for facial bone plastic surgery.

Product page